Nut-Seal - Anti-Corrosion Grease


	NUT-SEAL™ For Nut-Seal & related Inquiries: INTEGRA Technologies 3238 E. Pasadena Fwy. Pasadena, TX 77503 713-920-2400 Fax: 713-920-2313 nut-seal@integratechnologies.com

NUT-SEAL
ANTI-CORROSION
GREASE

Nut-Seal grease is specially formulated for use with Nut-Seal products. This is an anti-corrosion grease with excellent rust and oxidation inhibiting characteristics, a wide temperature application range of -10° to 325° and it has a an excellent resistance to oxidation. Because of excellent properties this grease will not wash out, pound out, splatter or squeeze out under the heaviest load of vibrations.

Typical Specifications

NLGI Consistency Number	2
NLGI Certified	GCS-LB
Thickener	Lithium Complex
Texture	Smooth
Color, Observed	Red
Worked 60 penetration, D-217	265-295
Dropping point, D-2265, °F. (°C)	550 (288)
Water washout, D-1264, % loss	2.5 @ 175°F
Rust Prevention, D-1743, rating	Pass
Copper Corrosion, D-4048	Pass
Oxidation Stability, D-942, psi drop	2 @ 100 hrs.
Oil Separation, D-1742	1
Timken OK Load, D-2509, lb	80
Four-Ball Wear, D-2266, mm	0.45
Four-Ball EP Weld Point, D-2596, kgf	315
Four-Ball Load Wear Index, D-2596, kgf	50
Four-Ball Last Nonseizure Load, D-2596, kgf	80
Approximate Temperature Range, °F.(°C)	-10 to 325 (-23 to 163)

CHARACTERISTICS OF OIL PLUS OIL
SOLUBLE ADDITIVES:

Viscosities:

	@100°C., eSt	43.96
	@40°C., eSt	632.5
	@210°F., eSt (SUS)	45.8(213)
	@100°F., eSt (SUS)	718.9(3330)

Viscosity Index

116